RP-3003 Construction Hoists, Platform Hoists, Rack & Pinion Hoists and Accessories

RP Platform Hoist
Our new RP Material Hoists provide greater safety and easier operation. Protect not only your mater...
The Marriot Hotel undergoing renovation required the use of our platform hoist...

:: Home :: Products :: Rack & Pinion Hoists :: RP-3003


	RP-3003 Rack & Pinion Hoist

	This 3,000 lbs capacity platform material hoist is used widely by masonry contractors to easily and safely transport pallets of bricks to upper levels at a construction site. Due to the increased weight capacity and platform size, this hoist does not have the same pivoting feature as the RP-2001 & RP-2010. Proximity switches monitor key locations and lock the unit from operating until the unit is safe to move. These switches are non-mechanical, completely waterproof and tamper proof providing the best in reliability and longevity. The RP-3003 utilizes a rack & pinion drive system which provides the simplest, most reliable and safest operation. Steel construction is finished with a durable powder coating to resist outdoor elements. Fail-safe electric brakes lock the machine in position in the event of a power failure. A roof enclosure is provided to protect workers while unloading material.

	Specifications

RP-3003 Platfrom Material Hoist
Shown without ANSI roof enclosure.

Lifting Capacity:	3,000 lbs.*
Operating Speed:	70 fpm*
Power Required:	230 V/ 3P/ 60Hz*
Duty Cycle:	100%
Clear Inside Dimensions:	60”W x 70”L
Outside Dimensions:	67”W x 76”L (Basket Only) 77.5”W x 76”L (Basket & Tower)
Base Footprint:	66.5”W x 76”L
Base Unit Weight:	1675 lbs.
Anchoring Distance:	10 - 15 ft**
Maximum Lifting Height:	400 ft.***
Motor HP:	Two 5 hp

* Constant voltage is required to maintain proper lifting capacity and speeds. If power supplied to the hoist does not meet the minimum requirements, damage may occur to the controls.
** Consult a structural engineer if unsure where to anchor the hoist.
*** For applications over this limit, please consult our sales department for additional heights.









Download files are available in Adobe Acrobat PDF format. If you are unable to view these files, please contact our sales department for other options. Files will open in a new window.


	Anchoring

Bracket # 262061 (Non-Pivot)	The 262061 is the most common bracket used on the RP-3003 Platform Hoist. This bracket allows the entire unit to sit perpendicular to the building. This bracket is also equipped with eight 9/16” bolt holes to provide the strongest connection to a building or scaffolding*. When anchoring to a concrete building, the minimum recommended bolt is 1/2” x 3-1/2”. For a more in depth explanation, consult our sales department.

Bracket # B11571 (Non-Pivot)	The B11571 is mostly used when installing between long stretches of scaffolding or within a shaft. This bracket is also equipped with six 9/16” bolt holes to provide the strongest connection to a building or scaffolding*. When anchoring to a concrete building, the minimum recommended bolt is 1/2” x 3-1/2”. For a more in depth explanation, consult our sales department.

* When attaching to scaffolding, consult a structural engineer to determine the best location and anchoring option. HTH cannot determine the best installation method when anchoring to scaffold.

Base Unit Breakout


	The RP-3003 Platform Hoist is sold as a base unit and separate tower kits for the desired lifting height. To the right is a simple base unit breakout showing the main parts of the hoist. The base unit contains one 5 foot tower section. The base assembly contains two forklift pockets spaced 18 inches apart for easy transportation. Four outrigger jacks provide leveling and stability.

Useful Accessories


		Pendant Extension Available in 50’ increments		Power Cord 220V/1-Phase 230V/3-Phase		Additional Pendant 10’ Pendant Twist Lock Plug

Example Photos


Used in conjunction with scaffolding, workers can easily move building material and tools between levels of scaffold and the building.				Construction crews can safely and quickly get rid of unused material without injury to fellow workers below.

Hi-Tech Hoist Corp. manufactures rack and pinion hoists, platform material hoists, portable material cable hoists, cable hoist accessories, platform hoist accessories, construction hoists, scaffolding hoists, mast climbers, material lifts, platform lifts, construction lifts and monorail hoists. HTH provides electric material hoists to general contractors, masonry contractors, scaffold distributors and many others.


	Distributor Area

All images, photos and documentation are the property of Hi-Tech Hoist Corp. Use without written consent is strictly prohibited. To acquire permission, submit a general inquiry. Information, specifications and details are subject to change without notification.
	Hi-Tech Hoist Corporation 360 East Drive, Melbourne, FL 32904-1029 800-451-5053 P: 321-733-3387 F: 321-733-9433	Last Updated: June 27, 2007