RP-2010 Construction Hoists, Platform Hoists, Rack & Pinion Hoists and Accessories

RP Platform Hoist
Our new RP Material Hoists provide greater safety and easier operation. Protect not only your mater...
The Marriot Hotel undergoing renovation required the use of our platform hoist...

:: Home :: Products :: Rack & Pinion Hoists :: RP-2010


	RP-2010 Rack & Pinion Hoist

	This 2,000 lbs capacity high speed platform material hoist provides a 45% faster operating speed over the RP-2001. With its 90 degree pivoting platform, workers can easily rotate the platform to offer multiple unloading configurations. Redundant safety features provide peace of mind on the job site. Proximity switches monitor key locations and lock the unit from operating until the unit is safe to move. These switches are non-mechanical, completely waterproof and tamper proof providing the best in reliability and longevity. The RP-2010 utilizes a rack & pinion drive system which provides the simplest, most reliable and safest operation. Steel construction is finished with a durable powder coating to resist outdoor elements. Fail-safe electric brakes lock the machine in position in the event of a power failure. A roof enclosure is provided to protect workers while unloading material.

	Specifications

RP-2010 Platform Material Hoist
Shown without ANSI roof enclosure.

Lifting Capacity:	2,000 lbs.*
Operating Speed:	100 fpm*
Power Required:	230 V/ 3P/ 60Hz*
Duty Cycle:	100%
Clear Inside Dimensions:	44”W x 70”L
Outside Dimensions:	47.5”W x 76”L (Basket Only) 61”W x 76”L (Basket & Tower)
Base Footprint:	66.5”W x 76”L
Base Unit Weight:	1550 lbs.
Anchoring Distance:	10 - 15 ft**
Maximum Lifting Height:	400 ft.***
Motor HP:	Two 5 hp

* Constant voltage is required to maintain proper lifting capacity and speeds. If power supplied to the hoist does not meet the minimum requirements, damage may occur to the controls.
** Consult a structural engineer if unsure where to anchor the hoist.
*** For applications over this limit, please consult our sales department for additional heights.









Download files are available in Adobe Acrobat PDF format. If you are unable to view these files, please contact our sales department for other options. Files will open in a new window.


	Anchoring

Bracket # B11431 (Pivot)	The B11431 is the most commonly used anchoring bracket. It allows for easy 90 degree pivoting at upper levels and a more convenient loading at the round level. This bracket is equipped with six 9/16” bolt holes to provide the strongest connection to a building or scaffolding*. When anchoring to a concrete building, the minimum recommended bolt is 1/2” x 3-1/2”. For a more in depth explanation, consult our sales department.

Bracket # B11571 (Non-Pivot)	The B11571 is mostly used when installing between long stretches of scaffolding or within a shaft. Because of the short distance between the wall and the tower, the 90 degree pivot feature cannot be utilized. This bracket is also equipped with six 9/16” bolt holes to provide the strongest connection to a building or scaffolding*. When anchoring to a concrete building, the minimum recommended bolt is 1/2” x 3-1/2”. For a more in depth explanation, consult our sales department.

Bracket # 262061 (Non-Pivot)	The 262061 is used when a opposite side loading/unloading will take place without pivoting the platform. This allows the entire unit to sit perpendicular to the building. The 90 degree pivot feature cannot be utilized due to the orientation of the platform with the building. This bracket is also equipped with eight 9/16” bolt holes to provide the strongest connection to a building or scaffolding*. When anchoring to a concrete building, the minimum recommended bolt is 1/2” x 3-1/2”. For a more in depth explanation, consult our sales department.

* When attaching to scaffolding, consult a structural engineer to determine the best location and anchoring option. HTH cannot determine the best installation method when anchoring to scaffold.

Base Unit Breakout


	The RP-2010 Platform Hoist is sold as a base unit and separate tower kits for the desired lifting height. To the right is a simple base unit breakout showing the main parts of the hoist. The base unit contains one 5 foot tower section. The base assembly contains two forklift pockets spaced 18 inches apart for easy transportation. Four outrigger jacks provide leveling and stability.

Useful Accessories


		Pendant Extension Available in 50’ increments		Power Cord 220V/1-Phase 230V/3-Phase		Additional Pendant 10’ Pendant Twist Lock Plug

Example Photos


Used in conjunction with scaffolding, workers can easily move building material and tools between levels of scaffold and the building.				Construction crews can safely and quickly get rid of unused material without injury to fellow workers below.

Hi-Tech Hoist Corp. manufactures rack and pinion hoists, platform material hoists, portable material cable hoists, cable hoist accessories, platform hoist accessories, construction hoists, scaffolding hoists, mast climbers, material lifts, platform lifts, construction lifts and monorail hoists. HTH provides electric material hoists to general contractors, masonry contractors, scaffold distributors and many others.


	Distributor Area

All images, photos and documentation are the property of Hi-Tech Hoist Corp. Use without written consent is strictly prohibited. To acquire permission, submit a general inquiry. Information, specifications and details are subject to change without notification.
	Hi-Tech Hoist Corporation 360 East Drive, Melbourne, FL 32904-1029 800-451-5053 P: 321-733-3387 F: 321-733-9433	Last Updated: June 27, 2007