Construction Hoists, Platform Hoists, Rack & Pinion Hoists and Accessories

RP Platform Hoist
Our new RP Material Hoists provide greater safety and easier operation. Protect not only your mater...
The Marriot Hotel undergoing renovation required the use of our platform hoist...

:: Home :: Products :: Rack & Pinion Hoists


	Rack & Pinion Platform Hoists

	Hi-Tech Hoist Corporation is a premier leader in platform material hoist manufacturing. These versatile material platform hoists allow for easy transportation of building material, tools and demolition material between multiple levels of a construction job. Built with safety in mind, each unit contains many redundant safety features that can both decrease downtime and prevent personnel injuries caused by manual lifting. You can easily increase productivity and reduce the time it takes for workers to get the material and tools they need. By providing quality products, customers can rest assured they have a reliable and safety product. These hoist can easily attach to buildings or scaffolding expanding building contractors capabilities.


	Platform Material Hoists


RP-2001 Hoist 2,000 lbs Capacity 400 ft Lifting Height 220V/1P Power 70 fpm Operating Speed 44”W x 70”L Clear Inside		RP-2010 Hoist 2,000 lbs Capacity 400 ft Lifting Height 230V/3P Power 100 fpm Operating Speed 44”W x 70”L Clear Inside		RP-3003 Hoist 3,000 lbs Capacity 400 ft Lifting Height 230V/3P Power 70 fpm Operating Speed 60”W x 70”L Clear Inside


	* Platform Hoists shown without included ANSI safety roof enclosure.

Anchoring

Bracket # B11431 (Pivot)	The B11431 is the most commonly used anchoring bracket. It allows for easy 90 degree pivoting at upper levels and a more convenient loading at the round level. This bracket is equipped with six 9/16” bolt holes to provide the strongest connection to a building or scaffolding*. When anchoring to a concrete building, the minimum recommended bolt is 1/2” x 3-1/2”. Anchorage using this bracket is required every 10-15 vertical feet. For a more in depth explanation, consult our sales department.

Bracket # B11571 (Non-Pivot)	The B11571 is mostly used when installing between long stretches of scaffolding or within a shaft. Because of the short distance between the wall and the tower, the 90 degree pivot feature cannot be utilized. This bracket is also equipped with six 9/16” bolt holes to provide the strongest connection to a building or scaffolding*. When anchoring to a concrete building, the minimum recommended bolt is 1/2” x 3-1/2”. Anchorage using this bracket is required every 10-15 vertical feet. For a more in depth explanation, consult our sales department.

Bracket # 262061 (Non-Pivot)	The 262061 is used when a opposite side loading/unloading will take place without pivoting the platform. This allows the entire unit to sit perpendicular to the building. The 90 degree pivot feature cannot be utilized due to the orientation of the platform with the building. This bracket is also equipped with eight 9/16” bolt holes to provide the strongest connection to a building or scaffolding*. When anchoring to a concrete building, the minimum recommended bolt is 1/2” x 3-1/2”. Anchorage using this bracket is required every 10-15 vertical feet. For a more in depth explanation, consult our sales department.

* When attaching to scaffolding, consult a structural engineer to determine the best location and anchoring option. HTH cannot determine the best installation method when anchoring to scaffold.

Example Photos


Used in conjunction with scaffolding, workers can easily move building material and tools between levels of scaffold and the building.				Construction crews can safely and quickly get rid of unused material without injury to fellow workers below.

Hi-Tech Hoist Corp. manufactures rack and pinion hoists, platform material hoists, portable material cable hoists, cable hoist accessories, platform hoist accessories, construction hoists, scaffolding hoists, mast climbers, material lifts, platform lifts, construction lifts and monorail hoists. HTH provides electric material hoists to general contractors, masonry contractors, scaffold distributors and many others.


	Distributor Area

All images, photos and documentation are the property of Hi-Tech Hoist Corp. Use without written consent is strictly prohibited. To acquire permission, submit a general inquiry. Information, specifications and details are subject to change without notification.
	Hi-Tech Hoist Corporation 360 East Drive, Melbourne, FL 32904-1029 800-451-5053 P: 321-733-3387 F: 321-733-9433	Last Updated: June 27, 2007

Rack & Pinion Platform Hoists